[Asterisk-Users] Gain adjustment

[Mojo with Horan & Company, LLC]

This isn't correct in all situations.  The gain adjustments are in 
percentages, and if you need a LOT of gain to compensate for the signal 
loss from the CO, then 0.1% really _does_ make a difference.

For example, when I'm watching the output of the CO's milliwatt 
generator, an addition of 0.05 on the rxgain brings my 148xx to over 
15000.  That's _half_ a /tenth/ of a percent.


Moj

Rich Adamson wrote:
>>    Need to stop asterisk and restart it. A reload will not take the new setting
>>    into consideration. There is no need to stop/start the zaptel drivers, just
>>    asterisk itself.
>>
>> 
>>OK.
>> 
>>If I set the gain to a negative number then i decrease the volume? And a positive number 
> 
> increases the volume?
> 
>> 
> 
> 
> That's correct. Don't bother with 1/10ths. Just use -2 or 4 or 0 or whatever.
> You can enter tenths, but its really not going to get you anywhere.
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Mojo <mojo at horanappraisals.com>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112