[Asterisk-Users] * point to point t1 solution?

[Jean-Michel Hiver]

Damon Estep a écrit :

>Lets put the TDMoE aside for a minute...
>
>The same trunking could be achieved with SIP or IAX, could it not (with higher latency)?
>
>The rest of the question remains - is there a way to get asterisk to output, bit for bit, on a t1 interface, the same data that is input on a remote asterisk box t1 interface - using any trunking protocol.
>
>This is what would be required to truly emulate a "signaling un-aware" point to point t1 like one that you would get from a telco if you ordered a point to point esf/b8zs t1 from A location to Z location.
>
>Pure circuit emulation - not ISDN/CAS/E&M signaled voice.
>  
>
You might want to take a look at rad.com array of products. They sell 
small boxes which cost around €3k each and which can do exactly what you 
are looking after, which they call TDMoIP. Of course, this is getter 
further away from Asterisk :(

Cheers,
Jean-Michel.

-- 
Jean-Michel Hiver - http://ykoz.net/
Découvrez la Réunion des Technologies IP & Telecom
TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE