[Asterisk-Users] Linksys SPA-941 multiple line appearences

Kerry Garrison support at techdatapros.com
Wed Jan 25 23:49:38 MST 2006


Accounts 3-4 are disabled, Account 1 is the only account. Thats it. Nothing
special. If you have problems, try doing *70. 
-Kerry
 


  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of tracinet
Sent: Wednesday, January 25, 2006 8:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Linksys SPA-941 multiple line appearences


This may sound odd, but I have the opposite problem.  I am trying to disable
call waiting by only allowing 1 call to come into the SPA-941, but I am
getting 2 calls per line key.  If have 1 extension set up on all 4 line
keys, the phone handles 8 incoming calls.  I have a few customers that like
that feature, but others that want to just have 1 call - any tips on what
you did to only get 1 call to ring through without doing any status checking
in the asterisk dialplan would be appreciated.

- Pedro


On 1/25/06, Michael Keyes <mkeyes5 at cox.net> wrote: 

I set up only 1 extension and set all 4 line appearences to point to that
extension.  I could place up to 4 outgoing calls as extension 1 no problem.
The problem happened when there was an active call on line appearence 1 and 
someone called extension 1.  Instead of ringing on line appearence 2
(extension 1) it would busy out.  My question, is there something in
Asterisk that needs to be adjusted to make the phone work properly or is
there a setting on the phone that needs to be adjusted?  Thank you.

Michael K


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
<mailto:asterisk-users-bounces at lists.digium.com> 
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Kerry
Garrison
Sent: Tuesday, January 24, 2006 10:33 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
Subject: RE: [Asterisk-Users] Linksys SPA-941 multiple line appearences


You only need to setup ONE account and all four call appearances will work.
-Kerry


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Michael Keyes
> Sent: Tuesday, January 24, 2006 3:41 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Linksys SPA-941 multiple line appearences 
>
> Has anyone had any experience with the Linksys SPA-941 when
> it comes to multiple line appearences?
>
> The 941 comes with 4 line appearence buttons which can
> individualy be configured to point at any extension.  The 
> phone is capable of 2 extensions out of the box with the
> option to add  2 more for a license fee.
>
> The 941 manual states that, "The Call Waiting function is
> activated when a device has a call in the active state and 
> another call is incoming. The phones in the SPA series do not
> support multiple calls on the same Line Key.
> Incoming calls are assigned to an unused Line Key, causing
> the Line Key to quickly blink red. (Note that the Voice Mail 
> Waiting Indicator also blinks red whenever there is an
> incoming call.) The phone will not ring. However, to alert
> the user, the call waiting tone is played into the active
> audio device." 
>
> During testing I set up an Asterisk 1.2 box with a 941 phone
> using firmware ver. 4.1.8.  I configured 1 extension and set
> all 4 line appearence buttons to point to that extension.  If
> there was an active call in progress I could place that call 
> on hold and by pressing line appearence button 2 was able to
> place an outgoing call.  That outgoing call would appear to
> come from extension 1.  This is all working as desired.
>
> If an active call was in progress and someone called my 
> extension the product manual indicates that call should
> appear on line appearence button 2.  During my testing
> Asterisk would flag my extension 1 as busy and instead of
> ringing the phone on line appearence 2 would send the call to 
> voicemail.
>
> Is anyone aware of any configuration setting needed on either
> the Asterisk server or on the phone to make Call Waiting
> function as described in the manual?  Thank you.
>
> Michael K
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list 
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


_______________________________________________ 
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list 
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060125/5d753f57/attachment.htm


More information about the asterisk-users mailing list