[Asterisk-Users] ZAP - Can't pickup calls on Analog Trunk

Alexander Lopez alex.lopez at opsys.com
Wed Jan 25 21:07:20 MST 2006


What you have are DID trunks, you need to know what signaling they use
E&M E&M Wink, E&M Wink Immediate.

If you can checkthe config on your existing PBX it may ell you. If not
you may need to call the Telco and (gasp!) ask!


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Asterisk User List
> Sent: Wednesday, January 25, 2006 8:43 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] ZAP - Can't pickup calls on Analog Trunk
> 
> >Are the trunks just pots lines (plain old telephone service lines)?
If
> you don't know you could put an analog phone
> >on the incoming lines and verify you can dial out. Also, if you call
> the line the phone should ring. If this is
> >true then you will need fxoks in your pbx instead of the fxsks.
> 
> They are lines from the phone company but unlike normal phone lines in
> the fact that they have multiple numbers per trunk line.  Such as
trunk
> 1 has the following numbers assigned to it:
> 555-1111
> 555-1112
> 555-1113
> 555-1114
> 555-1115
> 
> On the old PBX these lines are picked up and the then the called
number
> is checked, from there the call is routed to the appropriate desk
phone.
> Because of that I am not sure I can plug a standard phone in and get
> that phone to ring, I will give it a shot and see what happens.  I can
> however make calls out of the trunk through Asterisk this leads me to
> believe that it is correct to have FXO ports using fxsks instead of
FXS
> with fxoks.
> 
> Phil Smith
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list