[Asterisk-Users] loading zaptel drivers automatically upon reboot

[Carlos Alperin]

Just in case, this is my /proc/interrupts

[root at SIP2-MI proc]# cat interrupts
           CPU0
  0:      56794    IO-APIC-edge    timer
  8:          1    IO-APIC-edge    rtc
  9:          0    IO-APIC-level   acpi
 14:       4141    IO-APIC-edge    ide0
169:       2889    IO-APIC-level   libata, uhci_hcd:usb4, eth0
177:          0    IO-APIC-level   ehci_hcd:usb1
185:          0    IO-APIC-level   uhci_hcd:usb2, uhci_hcd:usb5
193:          0    IO-APIC-level   uhci_hcd:usb3
201:      86798    IO-APIC-level   t1xxp
NMI:          0
LOC:      56751
ERR:          0
MIS:          0

Still, modifying the numbers on the chkconfig --level for zaptel & asterisk
I get the same problem. I enabled zaptel on 1, 2, 3, 4, 5, and asterisk at
3,4 & 5.

Still doesn't load wct1xxp. The /proc/zaptel/1 doesn't exists. However, If I
stop both. Then start service by hand, everything goes fine.

Thanks again,

Carlos