[Asterisk-Users] zapata.conf for non pri T1?

[Dan Elder]

Hi again, I'm trying to setup our non pri T1 (they call it a Long Distance
T1), our current pbx has the signaling set to E&M, I can set em in
zapata.conf, but I'm trying to track down the proper entries for the
zaptel.conf file. The digium docs only show a PRI example. Our current
system has these settings:

Signalling: E&M
Framing mode: ESF
Line Coding: B8SZ

here's my bastardized entry right now (this doesn't work)


span=1,1,0,esf,b8zs
#fxsks=1-23

asterisk won't start like this & shows the following:

Jan 13 11:18:41 ERROR[4610] chan_zap.c: Signalling requested on channel 1 is
E & M Immediate but line is in FXS Kewlstart signalling
Jan 13 11:18:41 ERROR[4610] chan_zap.c: Unable to register channel '1-23'
Jan 13 11:18:41 WARNING[4610] loader.c: chan_zap.so: load_module failed,
returning -1
Jan 13 11:18:41 WARNING[4610] loader.c: Loading module chan_zap.so failed!

Is there a setting other than fxsks,fxsgs,fxsls that I should use for these
lines? (i.e. something like fxsem?)

Thanks in advance