[Asterisk-Users] Zaptel modules load, but Asterisk fails at s tartup

Copeland, Bryan BCopeland at SolaComm.com
Wed Jan 11 15:17:45 MST 2006


/etc/conf.d/local.start


-----Original Message-----
From: Francesco Peeters (Asterisk) [mailto:francesco at fampeeters.com] 
Sent: Wednesday, January 11, 2006 3:21 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Zaptel modules load, but Asterisk fails at
startup

On Wed, January 11, 2006 21:36, Stephen Bosch said:
> Francesco Peeters (Asterisk) wrote:
>> On Wed, January 11, 2006 19:35, Stephen Bosch said:

>>
>> Try running ztcfg -vvv
>
> Yes, that fixes it -- my question, I guess, is how to get that to run
> automatically at boot time...
>
> -s

Either put it in rc.local or in /etc/modules or /etc/modprobe.conf or
whatever the equivalent is on gentoo

For example in my /etc/modprobe.conf:
install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg
alias wcfxs wctdm

HTH

-- 
F Peeters
  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
  AMD Duron 1GHz - 1GB - * 1.2.1
  2 Sweex HFC-PCI cards
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list