[Asterisk-Users] GXP-2000 fw 1.0.1.13 and NTP

[Lee Archer]

I had a problem which I spoke to Grandstream about.  It seemed that
around 7 seconds in it goes for time sync and if it fails it doesn't
retry.  This problem was highlighted by the .12 firmware and a Windows
DHCP server we were using.  Upon moving to a Linux DHCP server the
process was much quicker and NTP worked.  However there isn't an auto
DST mode....  This upset a lot of people here where I work as all the
clocks were wrong.  Shame is these are reasonably cheap and fairly
descent phones but we are now moving towards the Aastra range.

I've tried out .13 and NTP worked fine. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Peter
Bowyer
Sent: 31 December 2005 10:35
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] GXP-2000 fw 1.0.1.13 and NTP

Hi all

Slightly OT but I know a lot of GS experts hang out here - I just
upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF
functionality with Asterisk (which so far works as expected), but as a
side-effect the phone won't sync with an NTP server - I've tried
different server names (time.nist.gov and
pool.ntp.org)  and IPs in the config, but it refuses to update the time
on the display.

Anyone heard of this? Any workarounds (other than go back to 1.0.1.12) ?

(Hmmm.. just regressed to 1.0.1.12 and it's still not working -
curiouser and curiouser said Alice...)

Thanks

Peter 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users