[Asterisk-Users] Asterisk PRI problems.

steve at daviesfam.org steve at daviesfam.org
Mon Jan 2 06:36:57 MST 2006



On Mon, 2 Jan 2006, Kristian Larsson wrote:

> I have an Avaya IP Office PBX connected to an
> Asterisk system via a Sangoma ISDN PRI card.
> Dialing from the as
> terisk system into the avaya works just fine but
> when trying to call from a phone connected to the
> avaya syste
> m something goes wrong. After punching the first
> four digits the Avaya calls out, shouldn't it wait
> for all di
> gits and then dial out?
> If I try to dial a three digit number it waits for
> a while then dials.
> 
> Is this some feature to let the CO know of which
> area code the calls is going ahead of time?
> Is there some way to circumvent this using hacks
> on the asterisk side?


Looks like you need to enable overlapdial=yes on the Asterisk side.  It
will then wait for additional digits sent from the Avaya after the initial
ones sent with the SETUP.

This goes in zapata.conf

Steve




More information about the asterisk-users mailing list