[Asterisk-Users] Re: Polycom Default Ring Volume [OT]

[Anton Krall]

 Guys, I think this might help everybody that has polycom phones.

Polycom never answered my email but after some testing I found the settings
to control default volumes after reboot:

For configuring the speakerphone volume after a phone restart (default
volume) you need to set in sip.cfg:
voice.gain.rx.digital.chassis="X" X been the default volume -15, -9 ... 0...
9...15  in 3 intervals

For configuring the ring volume after a phone restart (default volume) you
need to set in sip.cfg:
voice.gain.rx.digital.ringer="X" 
X been the default volume -30, -27 ... 0 in -3 intervals

For configuring the handset volume after a phone restart (default volume)
you need to set in sip.cfg:
voice.gain.rx.digital.handset="X"
X been the default volume -30, -27 ... 0 in -3 intervals

Hope this helps guys....


|-----Original Message-----
|From: asterisk-users-bounces at lists.digium.com 
|[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
|Henry Kwan
|Sent: Tuesday, February 28, 2006 1:43 PM
|To: asterisk-users at lists.digium.com
|Subject: Re: [Asterisk-Users] Re: Polycom Default Ring Volume [OT]
|
|>Kind of OT here, but just out of curiosity, how do you email 
|them?  Do 
|>you have an actual address, or do you just use the form on their web 
|>site?  I've sent a bunch of requests via that form, and even 
|though it 
|>says I should receive a response, I never have.  I've tried going 
|>through a couple of resellers, too, and haven't gotten anything.  I'm 
|>hoping you have some more direct (and effective!) means.
|
|I've contact Polycom via their web form and they emailed me 
|back around 2 days later.  We've purchased all of our phones 
|via authorized resellers. 
|Dunno if that makes a difference or not.
|
|My question was about the button programability and their 
|response was that the manual was incorrect.  You can not 
|program buttons to have extended functionality.  You can only 
|reprogram "hard" functions like ArrowUp or DoNotDisturb, not 
|"soft" functions like SpeedDial.  They will be removing those 
|references in the next revision of the manual.
|
|
|_______________________________________________
|--Bandwidth and Colocation provided by Easynews.com --
|
|Asterisk-Users mailing list
|To UNSUBSCRIBE or update options visit:
|   http://lists.digium.com/mailman/listinfo/asterisk-users
|
|