[Asterisk-Users] Cannot boot machine up after working on zaptel....

[Chris Earle (CBL)]

Thanks

Yeah, you would think so wouldn't you.....

Tried that , and still wouldn't boot

Really annoying..... beacuse I've been doing work with the zaptel drivers
and such and this happened once already...

Thanks for the suggestion,

Chris

----- Original Message ----- 
From: "Colin Anderson" <ColinA at landmarkmasterbuilder.com>
To: "'Chris Earle (CBL)'" <cearle at cbltech.ca>; "'Asterisk Users Mailing
List - Non-Commercial Discussion'" <asterisk-users at lists.digium.com>
Sent: Tuesday, February 28, 2006 10:05 AM
Subject: RE: [Asterisk-Users] Cannot boot machine up after working on
zaptel....


> What happens if you take out the Zaptel I/F's? If it boots, you can
correct
> whatever you did then replace them.
>
> hth
>
> -----Original Message-----
> From: Chris Earle (CBL) [mailto:cearle at cbltech.ca]
> Sent: Tuesday, February 28, 2006 7:45 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Cannot boot machine up after working on
> zaptel....
>
>
> Hi all,
>
> hard for me to explain this, but it keeps happening on a number of
machines
>
> I attempt to upgrade zaptel, or do something to zaptel modules..... and
then
> I reboot the machine, and for whatever reason, it hangs on loading the
> modules
>
> Either the install wasn't complete, the zaptel modules settings are wrong,
> whatever....
> but the problem is now I can't get past the boot up and the machine is
> basically lost
>
> Is there any way to bypass the module load attempt or anything?
>
> I've tried holding SHIFT down to get the LILO menu, and loading LinuxOLD,
> but no go
>
> I'm on Debian 2.4.18, with Zaptel 1.0.9.2
>
> I understand that there was something wrong in the modules config, but
> surely I should be able to bypass and get back in to fix it!
>
> Any ideas greatly appreciated, as I would rather not have to use an old
> clone drive and start over
>
>
> --
> Chris Earle
> System Solutions Specialist
>
>
> -- 
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> -- 
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.


-- 
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.