[Asterisk-Users] ISDN30E + T1 crossover cable woes

Phillip Hodges phillip at bespoke-computers.com
Tue Feb 28 04:17:02 MST 2006


Hi Phil, we have a very similar setup... ISDN30 plus TE110P... I used a 
standard cat5 patch lead... Worked a treat...

phil.dawson at marnock.com wrote:
>
> Hi,
>
> I'm having problems getting our server to work with our BT ISDN30 box. 
>  We are using a Digium TE110P card to connect to the ISDN box on the 
> wall.  The card is configured as an E1 (strap on).  I've made the T1 
> crossover cable ( well, made two variations ) and neither work.  The 
> light on the Digium card flashes red and the red LED's on the ISDN box 
> stay lit.  I've tested the configuration and all modules load ok. 
>  Done a ztcfg -vvvvv and things look ok.  Done zttest and get around 
> 99.7% - 99.9%.  After loading asterisk I did a zap show status and 
> alert is red.
>
> After googling I found this statement:
>
> RED: Loss of signal (LOS): The equipment shall assume "loss of signal" 
> when the incoming signal amplitude is, for a time duration of at least 
> 1 ms, more than 20 dB below the nominal amplitude. The equipment shall 
> react within 12 ms by issuing AIS.
>
> The question is, is this a configuration issue, cable issue or BT issue.
>
> Digium's site is down so couldn't look there  :-(
>
> One of the diagrams I used is here:
>
> http://www.gcom.com/home/documents/faqs/cables_&_t1.htm
>
> The other diagram ( can't seem to find that now ) used 1-5, 2-4 etc.
>
> Has anyone seen this problem?
>
> Thank you in advance.
>
> Phil.
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   


------------------------------------------------------------------------------------------
This e-mail is confidential and is intended solely for the use of the individual
to whom it is addressed. Any views or opinions presented are solely those of the
author and do not necessarily represent those of Bespoke Textile Computer Systems Ltd.
If you are not the intended recipient, be advised that you have received this e-mail
in error and that any use, dissemination, forwarding, printing, or copying of this
e-mail is strictly prohibited. If you have received this email in error please email
postmaster at bespoke-computers.com
------------------------------------------------------------------------------------------
Checked by alt-n MDaemon Antivirus
Definition count:  168254
Definition date:  2006/02/28
MDAV version: 2.2.8

------------------------------------------------------------------------------------------




More information about the asterisk-users mailing list