[Asterisk-Users] NEED COMMENT ON USING FEDORA CORE 3

[Keith Mitchell]

Yes and Fedora turns "on" a bunch of services by default that tend to be
unneccessary, i.e. Sendmail, GDM, XFS, etc.  If you are unfamiliar, you
may want to run setup, which has explanations of each service when you
hit <F1> 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Technical
Support
Sent: Tuesday, February 21, 2006 3:33 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] NEED COMMENT ON USING FEDORA CORE 3

We've setup some FC3 systems with T1 at 100% - no problems.  As noted
below, I suspect other processes (or lack of computing power) may be
causing your issues.  Even things like turning off the gui (run level 3)
can make a big improvement.

MD

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rich
Adamson
Sent: Tuesday, February 21, 2006 2:51 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] NEED COMMENT ON USING FEDORA CORE 3


> Can somebody share his experience with me in using fedora core 3 as 
> asterisk server using quad port card (e1/pri) at full capacity.

Runs fine and is very stable.  "Full capacity" is 100% dependent on
exactly what asterisk is doing (eg, transcoding), the PC hardware, etc,
and has nothing to do with fc3.



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users