[Asterisk-Users] Setting up an EICON CARD with CAPI

cédric Buzay cedric.buzay at lucyde.com
Tue Feb 21 06:39:26 MST 2006


Ok I update from sourceforge the chan-capi-cm 0.6.4 with the good 
capi.conf  and now it's working fine.
I still not know why the old one (package from debian) are not working 
with the old capi.conf ?

Thanks for your help ,

Cédric

Armin Schindler a écrit :

>What version of chan_capi do you use? Your capi.conf is for an old 
>chan_capi. If you use an old version, please update to chan_capi
>from sourceforge.net and adapt your capi.conf.
>
>Armin
>
>
>On Tue, 21 Feb 2006, cédric Buzay wrote:
>
>  
>
>>Hi everybody.
>>
>>I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7
>>My linux is a debian.
>>It was working during a few days an suddenly (after a lot of reboot)
>>I've got this error message that seems to be very popular but I couldn't
>>find any
>>answer on the net :
>>
>>==============================================.
>>Asterisk Dynamic Loader Starting:
>> == Parsing '/etc/asterisk/modules.conf': Found
>>[chan_capi.so] => (Common ISDN API for Asterisk)
>> == Parsing '/etc/asterisk/capi.conf': Found
>>Feb 21 03:08:34 NOTICE[10319]: chan_capi.c:2645 load_module: unable to
>>listen!
>>Feb 21 03:08:34 WARNING[10319]: loader.c:345 ast_load_resource:
>>chan_capi.so: load_module failed, returning -1
>> == Unregistered channel type 'CAPI'
>>Feb 21 03:08:34 WARNING[10319]: loader.c:391 load_modules: Loading
>>module chan_capi.so failed!
>>===============================================
>>
>>I've got all the persmissions on the .conf files and on the /dev/capi20
>>
>>my drivers are those :
>>dmesg | grep -i capi
>>Eicon DIVA - CAPI Interface driver (http://www.melware.net)
>>divacapi: Rel:2.0  Rev:1.24  Build: 105-75(local)
>>divacapi: module unloaded.
>>Eicon DIVA - CAPI Interface driver (http://www.melware.net)
>>divacapi: Rel:2.0  Rev:1.24  Build: 105-75(local)
>>
>>and they work at a CAPI  level :
>>
>>Update CFGLib information ... succeeded
>>Start adapter Nr:1 - 'Diva Server V-4BRI-8', SN: 23208 ... OK (already
>>active)
>>Successfully updated configuration of Diva Server V-4BRI-8 PORT: 0 SN:
>>Successfully updated configuration of Diva Server V-4BRI-8 PORT: 1 SN:
>>Successfully updated configuration of Diva Server V-4BRI-8 PORT: 2 SN:
>>Successfully updated configuration of Diva Server V-4BRI-8 PORT: 3 SN:
>>Successfully updated configuration of Diva TTY driver
>>Successfully updated configuration of Diva MTPX driver
>>Successfully updated configuration of Diva CAPI driver
>>
>>My modules.conf seems correct:
>>=================================================
>>[....]
>>noload => app_intercom.so
>>; 
>>;  Explicitly load the chan_modem.so early on to be sure
>>;  it loads before any of the chan_modem_* 's afte rit
>>; 
>>; load => chan_modem.so
>>; load => res_musiconhold.so
>>load => chan_capi.so
>>; 
>>;  Load either OSS or ALSA, not both
>>;  By default, load OSS only (automatically) and do not load ALSA
>>; 
>>noload => chan_alsa.so
>>noload => chan_oss.so
>>
>>; 
>>;  Module names listed in "global" section will have symbols globally
>>;  exported to modules loaded after them.
>>; 
>>[global]
>>;chan_modem.so=yes
>>chan_capi.so=yes
>>
>>And my capi.conf also :
>>
>>; 
>>;  CAPI config
>>; 
>>; 
>>[general]
>>nationalprefix=0
>>internationalprefix=00
>>rxgain=0.8
>>txgain=0.8
>>
>>[interfaces]
>>msn=0MYNUMBER0
>>incomingmsn=*
>>controller=1
>>; softdtmf=1
>>; accountcode=
>>context=demo
>>;echosquelch=1
>>echocancel=yes
>>; echotail=64
>>; callgroup=1
>>; deflect=12345678
>>devices=2
>>=================================================
>>
>>Any ideas ???
>>
>>Thanks
>>
>>Cédric
>>
>>
>>
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>    
>>




More information about the asterisk-users mailing list