[Asterisk-Users] Setting up an EICON CARD with CAPI

[Armin Schindler]

What version of chan_capi do you use? Your capi.conf is for an old 
chan_capi. If you use an old version, please update to chan_capi
from sourceforge.net and adapt your capi.conf.

Armin


On Tue, 21 Feb 2006, cédric Buzay wrote:

> Hi everybody.
> 
> I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7
> My linux is a debian.
> It was working during a few days an suddenly (after a lot of reboot)
> I've got this error message that seems to be very popular but I couldn't
> find any
> answer on the net :
> 
> ==============================================.
> Asterisk Dynamic Loader Starting:
>  == Parsing '/etc/asterisk/modules.conf': Found
> [chan_capi.so] => (Common ISDN API for Asterisk)
>  == Parsing '/etc/asterisk/capi.conf': Found
> Feb 21 03:08:34 NOTICE[10319]: chan_capi.c:2645 load_module: unable to
> listen!
> Feb 21 03:08:34 WARNING[10319]: loader.c:345 ast_load_resource:
> chan_capi.so: load_module failed, returning -1
>  == Unregistered channel type 'CAPI'
> Feb 21 03:08:34 WARNING[10319]: loader.c:391 load_modules: Loading
> module chan_capi.so failed!
> ===============================================
> 
> I've got all the persmissions on the .conf files and on the /dev/capi20
> 
> my drivers are those :
> dmesg | grep -i capi
> Eicon DIVA - CAPI Interface driver (http://www.melware.net)
> divacapi: Rel:2.0  Rev:1.24  Build: 105-75(local)
> divacapi: module unloaded.
> Eicon DIVA - CAPI Interface driver (http://www.melware.net)
> divacapi: Rel:2.0  Rev:1.24  Build: 105-75(local)
> 
> and they work at a CAPI  level :
> 
> Update CFGLib information ... succeeded
> Start adapter Nr:1 - 'Diva Server V-4BRI-8', SN: 23208 ... OK (already
> active)
> Successfully updated configuration of Diva Server V-4BRI-8 PORT: 0 SN:
> Successfully updated configuration of Diva Server V-4BRI-8 PORT: 1 SN:
> Successfully updated configuration of Diva Server V-4BRI-8 PORT: 2 SN:
> Successfully updated configuration of Diva Server V-4BRI-8 PORT: 3 SN:
> Successfully updated configuration of Diva TTY driver
> Successfully updated configuration of Diva MTPX driver
> Successfully updated configuration of Diva CAPI driver
> 
> My modules.conf seems correct:
> =================================================
> [....]
> noload => app_intercom.so
> ; 
> ;  Explicitly load the chan_modem.so early on to be sure
> ;  it loads before any of the chan_modem_* 's afte rit
> ; 
> ; load => chan_modem.so
> ; load => res_musiconhold.so
> load => chan_capi.so
> ; 
> ;  Load either OSS or ALSA, not both
> ;  By default, load OSS only (automatically) and do not load ALSA
> ; 
> noload => chan_alsa.so
> noload => chan_oss.so
> 
> ; 
> ;  Module names listed in "global" section will have symbols globally
> ;  exported to modules loaded after them.
> ; 
> [global]
> ;chan_modem.so=yes
> chan_capi.so=yes
> 
> And my capi.conf also :
> 
> ; 
> ;  CAPI config
> ; 
> ; 
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> 
> [interfaces]
> msn=0MYNUMBER0
> incomingmsn=*
> controller=1
> ; softdtmf=1
> ; accountcode=
> context=demo
> ;echosquelch=1
> echocancel=yes
> ; echotail=64
> ; callgroup=1
> ; deflect=12345678
> devices=2
> =================================================
> 
> Any ideas ???
> 
> Thanks
> 
> Cédric
> 
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>