[Asterisk-Users] Cisco 2620 as PRI gateway

[Tim Reimers]

That worked!  thanks Kurt...


On  a side note...  

Somehow, ALL of the phone calls ended up coming to my SIP phone---

I need to figure out the appropriate 'inbound routing' 

such that all calls coming from the PRI router (extensions 6350 through
6399)
get sent directly to the right extension...

right now, the incoming routing is set to 'use incoming calls'
settings...

I don't know what I need to configure such that calls for all 50 DIDs
arriving 'from' the router
are handled by (hopefully one route) that says "send the call to the
extension that matches the digits"

Thanks, Tim



 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of kurt x
Sent: Tuesday, February 14, 2006 9:50 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Cisco 2620 as PRI gateway

A 488 can mean a codec miss match.  Check that your Asterisk box is
configured for g729.

Kurt
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users