[Asterisk-Users] ztdummy on gentoo 2005.1

[Gerard Saraber]

Invalid module format usually means that the module you're trying to
load was not compiled with the same parameters as the kernel you're
trying to load it into, make sure your /usr/src/linux symlink points to
the kernel you are actually running, /var/log/messages etc. will usually
have more specific information on why the module format is 'wrong' .

I would suggest after checking the /usr/src/linux symlink, to recompile
the kernel, the ztdummy module and booting into the newly compiled
kernel. its possible that all it takes is to recompile the module
though.

Regards,
Gerard Saraber
gsaraber at rarcoa.com

On Thu, 2006-02-09 at 09:30 -0600, Miguel wrote:
> I changed the line with your sugestion but same result (after reboot):
> 
> voip # lsmod
> Module                  Size  Used by
> voip # modprobe ztdummy
> FATAL: Error inserting ztdummy 
> (/lib/modules/2.6.12-gentoo-r10/misc/ztdummy.o): Invalid module format
> FATAL: Error running install command for ztdummy
> voip mmiranda #
> 
> ---
> Miguel
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
-- 
Regards,
Gerard Saraber
Network Admin, Rarcoa, Inc.
(630) 654-2580 x11
gsaraber at rarcoa.com