[Asterisk-Users] Asterisk SIP phones to Cisco Unity via CCM4.0SIPTrunk

[sys read]

Hrm, I made a new extension, made sure that I could dial it from a ccm phone
-> asterisk.  then I set that as an alternate MWI extension ( it always put
X in as an additional entry ).   the AGI I have behind that extension never
runs ( in fact, unity never calls asterisk ).

any other suggestions?


On 2/1/06, Dan Austin <Dan_Austin at phoenix.com> wrote:
>
> >       thanks, using your example, and this url:
> >
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
> 9186a00800dea82.shtml
> <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note
> 09186a00800dea82.shtml>
>
> >       I got it to work... then I realized that there's no way the SIP
> phone > on asterisk is going to get the MWI ( message waiting indicator
> )...  how > are my users going to know they got a unity voice
> message?... doh.
> This would be the trickiest, but not unsolvable.
> For each Asterisk connect Unity user, modify their MWI extension
> in their Unity sunscriber profile to dial Asterisk.  On Asterisk
> add an extension with a small AGI script to 'touch' the local VM
> status.
>
> >       we might as well buy the 7940s ( I wanted to get a bunch of 941s
> ),
> > or ditch unity... hrm.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060203/ab8ee53d/attachment.htm