[asterisk-users] Need help getting started with asterisk

[Michael Sullivan]

On Wed, 2006-12-13 at 14:21 +1100, Paul Hales wrote:
> I would be very surprised if your modem is supported by Asterisk - but I
> suppose it's worth a try.
> 
> What does 'zap show status' and 'zap show channels' show in the Asterisk
> CLI?
> 
> PaulH

OK.  I got the Motorola X100P put in:

Relevant lspci -v output:

05:01.0 Communication controller: Motorola Wildcard X100P
        Subsystem: Motorola Unknown device 0000
        Flags: bus master, medium devsel, latency 32, IRQ 22
        I/O ports at b800 [size=256]
        Memory at ff900000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2


However, although I can modprobe wctdm successfully, ztcfg still balks:

camille ~ # modprobe wctdm
camille ~ # /sbin/ztcfg -vv

Zaptel Configuration
======================


Channel map:

Channel 02: FXS Kewlstart (Default) (Slaves: 02)

1 channels configured.

ZT_CHANCONFIG failed on channel 2: No such device or address (6)


"zap show channels" comes back with encouraging results though:

camille*CLI> zap show channels
   Chan Extension  Context         Language   MusicOnHold         
 pseudo            default                                        


Do I need to moprobe something else or alter my kernel config for ztcfg
not to error?
-Michael Sullivan-