[asterisk-users] repost gain problem with asterisk and zaptel 1.4

[Eric "ManxPower" Wieling]

You MUST set the options BEFORE the channel= line or they won't be used.

jason wrote:
> Most certainly.  This is my current file.  I've toyed with the gain 
> settings, going as high as 100 on rxgain and even toyed with txgain for 
> a bit.  It's very bare because I haven't invested any further time into 
> this machine until I get the gain figured out. On a side note, I've used 
> this card in a Xen VM running 1.2 and did not have any gain issues.
> 
> ----------------------------------
> ; Zapata telephony interface
> 
> [trunkgroups]
> ;
> [channels]
> ;
> context=incoming
> switchtype=national
> ;
> signalling=fxs_ks
> channel=>1
> usecallerid=yes
> cidsignalling=bell
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> musiconhold=default
> 
> 
> 
> Tzafrir Cohen wrote:
>> On Tue, Dec 12, 2006 at 08:57:05AM -0600, jason wrote:
>>  
>>> Hey guys, I'm having some trouble with gain settings using a Wildcard 
>>> X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3.  My transmit 
>>> volume between an IAX client (idefisk) and a POTS device through my 
>>> 1.4 box is great, but my receive volume is terrible.  I can hardly 
>>> hear a word they say. I've cranked my gains up to 100,  inserted the 
>>> wcfxo module with boost=1, but haven't had any luck figuring this 
>>> out.   Using ztmonitor, the best I can get on my RX side is 3 #'s 
>>> (###)) and that's if I really talk loudly into the phone.   Any 
>>> pointers on other places I can look? Volume is great on IAX to IAX, 
>>> only poor on calls from IAX to POTS.  I haven't tried the other 
>>> direction because this box isn't setup to receive POTS calls.
>>>     
>>
>> Could you post your zapata.conf ?
>>
>>   
>