[asterisk-users] Sipura 3000 and Asterisk

Ariel Monaco arielmonaco at flylabs.com
Wed Aug 30 14:00:33 MST 2006


Sorry,

http://voxilla.com/PNphpBB2-viewforum-f-14.html

Cheers,
  ----- Original Message ----- 
  From: Francisco Seratti 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Wednesday, August 30, 2006 5:39 PM
  Subject: Re: [asterisk-users] Sipura 3000 and Asterisk


  Dave Fullerton escribió: 
    Francisco Seratti wrote: 

      Hi pals, im trying to save some money in cellphones calls, so i bought a GSM gateway and a Sipura SPA3000 gateway. 
      The GSM gw is currently working, and now im trying to configure the SPA, but every call i send, i get a 503 service unavailable. 
      Im using this extension to match cell calls and sendthem to the spa: 

      exten => _15.,1,Dial(SIP/300/${EXTEN})   ; cellphones are 15xxxxxxxx and 300 is the spa3000 extension, registered OK 
      exten => _15.,2,Hangup 

      In the dialplan section of the sipura, i ve tried many different options like xx.<:@gw0>, (xx.) and many others. 
      I cannot find a formal configuration doc for this device, so if you giveme a hand to configure it or tellme where to start, or where 
      is the problem i would be very pleased. 



    This may be a stupid question, but are you sure you are using the registration for the FXO port (PSTN Line) and not the FXS port (line 1) 
    ? I usually don't give my trunk lines extension numbers is why I ask. 

    -Dave 
    _______________________________________________ 
    --Bandwidth and Colocation provided by Easynews.com -- 

    asterisk-users mailing list 
    To UNSUBSCRIBE or update options visit: 
      http://lists.digium.com/mailman/listinfo/asterisk-users 

    __________ NOD32 1.1730 (20060829) Information __________ 

    This message was checked by NOD32 antivirus system. 
    http://www.eset.com 




  Dave, thanks for your time. Yes, im sure it was the FXO port that i regitered in the Asterisk. Do you know in which cases a 503 "Service Unavailable" is obtained?
  I also configured the syslog for this line and im getting just before the 503 response, the line: "<151>AUD:Stop PSTN Tone". I dont know what is this, but maybe a clue. If you need an extra data or config,, ask to me.


  -- 
  Francisco Seratti
  Sunesys Telecomunicaciones
  Bouchard 644. 5to A. Puerto Madero
  seratti at sunesys.com.ar
  Tel: (54) 011- 4311-9009 (Rotativas)



------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation provided by Easynews.com --

  asterisk-users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060830/b3f51eb0/attachment.htm


More information about the asterisk-users mailing list