[asterisk-users] Polycom 501 vs 601 provisioning

[David Gagnon]

Most of the time, the sample provided by Polycom is the same than the other
version. So you don’t need to use the new xml. If they add something, it’s
written in the release (pdf) so you just need to add what they say.

 

David

 

  _____  

De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Douglas
Garstang
Envoyé : 22 août 2006 11:05
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : RE: [asterisk-users] Polycom 501 vs 601 provisioning

 

Yes, the config files are the same across a single version of the SIP
application software for 301/501/601. If you upgrade however, you'll need to
use the new xml files supplied with that version. Polycom needs to get a
clue and either make the files backwards compatible or provide a conversion
utility.

 

Doug.

-----Original Message-----
From: Mike [mailto:list at virtutel.ca]
Sent: Tuesday, August 22, 2006 8:44 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] Polycom 501 vs 601 provisioning

Hi,

 

I have a bunch of Polycom 501 provisioned centrally, and its all working
fine.  I am toying with the idea of adding one 601, but I will only do so if
the provisioning acceptes the same files (i.e. sip.cfg can be common to both
501 and 601s) so as not to burden me any further just for one phone.  

 

Is this the case?

 

Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060822/10f8b44d/attachment.htm