[asterisk-users] using asterisk + sangoma a102 to simulate telco PRI: is possible?

[Rich Adamson]

Giorgio Incantalupo wrote:
> Hi,
> I have an asterisk box with a sangoma a102 (two PRI ports).
> Is is possible to connect port A to port B in order to use port B as a 
> simulation of a telco PRI line?
> If yes, is there a special cable needed? How can I configure the card 
> and zaptel.conf?

Yes. You'll need a T1 crossover cable to do it. Google for which pins to 
swap.

Configure one port as pri_net (acts as a central office switch) and the 
other port as pri_cpe (acts as a pbx). See the sample configs for other 
parameters (including /etc/zaptel.conf timing parameters).

Your zapata.conf entries will look something like these:
resetinterval=never  ; gets rid of the many restart messages
context=pri-in
signalling=pri_net
switchtype=national
pridialplan=unknown
channel=>1-23

context=pri-out
switchtype=national
signalling=pri_cpe
pridailplan=unknown
group=7
channel=>25-47

And, /etc/zaptel.conf something like this:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48