[asterisk-users] Integrating Asterisk with a Panasonic D500 using MFC/R2

[Steve Underwood]

Thierry Querette wrote:

>
> Hi Carlos,
>
> I had the same problem and spent a lot of time studying the MFC/R2 
> protocol .... but the problem is in the libmfcr2 package version!!
>
> Try using the packages in: 
>
> http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7
>
> And not in pre9.
>
> Both "pre7" and "pre9" have libmfcr2-0.0.3.tar.gz 
> <http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7/libmfcr2-0.0.3.tar.gz>  
> with the same name..  but in different sizes. They are different.

pre9 works just fine. His problem is something completely different. His 
configuration does not match the requirements of the PBX.

Steve