[Asterisk-Users] Legacy PBX integration

[Remco Barende]

Duh.. sorry for this dumb mistake, basicaly the connection is:

PRI <-TE210 Port 1-> * <-TE210 Port 2-> Legeacy PBX

Basically I need * to send whatever the telco used to send to the pri

Thanks!


On Sun, 30 Apr 2006, Jerry Jones wrote:

> You do not say how you have the two connected/
>
> Are you connecting the * to stations via fxo or to lines via fxs on the 
> legacy?
>
>
> On Apr 30, 2006, at 11:22 AM, Remco Barende wrote:
>
>> Hi list!
>> 
>> I managed to come reasonably far (farther than I thought I would) but have 
>> two problems.
>> 
>> I still need to pass calls to the Legacy PBX for Fax (I need it as a 
>> channel bank).
>> 
>> I have calls coming in into asterisk, that works fine. Based on the DID I 
>> can route calls to the Legacy PBX but I'm puzzled how.
>> 
>> I guess I need a new dial command for that? All fax calls are now coming in 
>> a new context which I called topbx. If I issue a dial command there the 
>> legacy PBX treats it as a local extension call and not a call from the 
>> outside.
>> 
>> Which dial command do I need to use to make the old PBX believe the call 
>> came from outside?
>> 
>> (All the pages I found on this subject mention something about retaining 
>> caller ID which is nice but now I need to retain DID info on the call I 
>> guess?)
>> 
>> Thanks for any help!
>> 
>> 
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>> 
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users
>