[Asterisk-Users] Re: Official TE411P echo settings??

[Steven]

So if I switch between a TE411P and TE410P or vice versa, I should not change anything in my config.
Correct?

-- 
-- 
Steven

http://www.glimasoutheast.org



  "Rob Lith" <rob at connection-telecom.com> wrote in message news:32b7e7b80604281304lb8ca0d5tff78ded1b45e1c70 at mail.gmail.com...
  On 28/04/06, Steven <asterisk at tescogroup.com> wrote:
    I have seen conflicting references in regards to the Digium Wildcard TE411P echo settings in zapata.conf.

    Does anyone have the official word on this?
    Should echo cancel be enabled in zapata.conf if the card has built in EC? 
    If so, should a particular EC method be compiled into the zaptel build?

   
  If you have 'echocancel=yes' then echo cancellation is on and if you have hardware available it will use it, otherwise it will be done in software. 

  Rob



------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation provided by Easynews.com --

  Asterisk-Users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060428/672239a2/attachment.htm