[Asterisk-Users] Polycom MWI

[Bill Gibbs]

Ohh yeah good point.  I had a similar issue when I started using FreePBX
and it didn't fill out the mailbox field automatically.  Once I added
the xxx at device there the MWI started working as well.

Bill

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Avi Miller
Sent: Friday, April 21, 2006 12:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom MWI

Kerry Garrison wrote:
> Didn't help. Could I be missing something else?

My phone.cfg looks like this:

  <mwi
    msg.mwi.1.subscribe="300"
    msg.mwi.1.callBackMode="contact"
    msg.mwi.1.callBack="*97"/>

And sip.conf for extension 300:

[300]
username=300
type=friend
secret=***
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
pickupgroup=1
nat=never
mailbox=300 at device
host=dynamic
dtmfmode=rfc2833
disallow=all
context=from-internal
canreinvite=no
callgroup=1
callerid=Polycom IP501 <300>
allow=alaw
allow=g729


Mine works fine, so I hope that helps. :)

-- 
National Manager - Special Projects

< Sydney / Melbourne / Canberra / Hobart / London />
   2/340 Gore Street      T: +61 (0) 3 9486 0411
   Fitzroy, VIC           F: +61 (0) 3 9486 0611
   3065                   W: http://www.squiz.net/

.....>> Open Source  - Own it  -  Squiz.net ...../>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users