[Asterisk-Users] T1 to cross connect remote PBX and asterisk

[C F]

On 4/18/06, Damon Estep <damon at suburbanbroadband.net> wrote:
> I see, I misunderstood what you meant by "customer". It is not you at
> one end and the customer at the other, you are doing the work for a
> customer that owns both endpoints...
>

exactly.

>
>
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of C F
> > Sent: Tuesday, April 18, 2006 3:02 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] T1 to cross connect remote PBX and
> asterisk
> >
> > On 4/18/06, Damon Estep <damon at suburbanbroadband.net> wrote:
> > > Yep,
> > >
> > > I agree,
> > >
> > > Just watch out for regulatory issues if you are in the USA, handing
> a
> > > CUSTOMER a TDM interface vs. a SIP/VoIP interface falls under a much
> > > different regulatory and jurisdictional set of rules...
> >
> > regulatory issues only apply if I'm a provider, this is all for
> > implementing a private circuit.
> >
> > >
> > > Have you talked to anyone that has confirmed an implementation like
> > > described works without issues?
> >
> > not as a PRI, but I have done this with 2 Adit 600s like this:
> > Site A Definity 3G System <> Analog station cards <> Adit 600 FXO Card
> > and router card <> Private full T1 circuit to longdistance haul <>
> > Site B <> Adit 600 FXS Card and router card.
> > With the above config we got analog extensions of our Avaya system,
> > and a local network routed over the left over channells (IIRC we did
> > 12 data and 12 voice, all provisioned from the Adit 600s).
> >
> > >
> > > Damon
> > >
> > > > -----Original Message-----
> > > > From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-
> > > > bounces at lists.digium.com] On Behalf Of C F
> > > > Sent: Tuesday, April 18, 2006 12:31 PM
> > > > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > > > Subject: Re: [Asterisk-Users] T1 to cross connect remote PBX and
> > > asterisk
> > > >
> > > > In theory it should work, I have just written a proposal for
> someone
> > > > that involves such a setup. in worst case I can always utilize the
> > > > circuit as data, and use 2 asterisk boxes one on each end to
> convert
> > > > it back to NI2.
> > > >
> > > > On 4/18/06, Damon Estep <damon at suburbanbroadband.net> wrote:
> > > > >
> > > > >
> > > > >
> > > > > Looking for someone with a successful experience similar to
> this;
> > > > >
> > > > >
> > > > >
> > > > > I have a need to cross connect a 3COM NBX PBX PRI interface to
> > > asterisk,
> > > > but
> > > > > over a long distance. We do not need any IP connectivity and the
> > > > solution
> > > > > requires G.711u audio so there is no benefit to using IP.
> > > > >
> > > > >
> > > > >
> > > > > Has anyone here successfully cross connected any PBX PRI
> interface
> > > > expecting
> > > > > NI2 PRI signaling B8ZS/ESF with an asterisk box providing
> > > PRI_Network
> > > > > signaling on a T1 interface card using a long haul point to
> point
> > > > ESF/B8ZS
> > > > > T1?
> > > > >
> > > > >
> > > > >
> > > > > I do not need the technical details on how to set up asterisk or
> the
> > > > remote
> > > > > PBX, just need a sanity check on the idea of using the PTP T1 as
> a
> > > cross
> > > > > connect facility. If they were local to each other I would
> simply
> > > drop
> > > > in a
> > > > > T1 crossover cable, but they are not J
> > > > >
> > > > >
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > --Bandwidth and Colocation provided by Easynews.com --
> > > > >
> > > > > Asterisk-Users mailing list
> > > > > To UNSUBSCRIBE or update options visit:
> > > > >
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > > >
> > > > >
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com --
> > > >
> > > > Asterisk-Users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>