[Asterisk-Users] enablling Te110p with PRI

[Rafael Visser]

Sorry, at the switch side, the spam is ABL (automatic blocked), is like to
be "Not Aligned".
Im not sure about the required parameters to configure the ericsson with
isdn-pri.
So, lets just wait if someone help me with the isdn config first!!!!..
Thanks.





Steven Ringwald <asric at asric.com>@lists.digium.com con fecha 20/04/2006
03:47:06 p.m.

Por favor, responda a ringwas at acm.org; Por favor, responda a Asterisk Users
       Mailing List - Non-Commercial Discussion
       <asterisk-users at lists.digium.com>

Enviado por:      asterisk-users-bounces at lists.digium.com


Destinatarios:    Asterisk Users Mailing List - Non-Commercial Discussion
       <asterisk-users at lists.digium.com>
CC:
Asunto:     Re: [Asterisk-Users] enablling Te110p with PRI


Rafael Visser wrote:
> Hi gurus...
>
> I have connected an asterisk with a te110p/pri to a GSM ericsson switch,
all apears to be write. But when i try to make an outbond call
> from asterisk to the te110p group,  the folowing error is logged:
>
>   -- Executing Dial("SIP/201-5923", "ZAP/1-1/0971200152|20|r") in new
stack
>   == Everyone is busy/congested at this time (1:0/0/1)
>
>
> Question:
> Is there a "how to" connect the Asterisk to an ericsson sw?
> What other test can i do against the switch?.
>
> Thanks in advance...
>

What does the exact "Dial" line look like in your extensions.conf?

Is 0971200152 the number that the other end is expecting?

For instance, our Shoretel "requires" the country code be added, for
instance 1503XXXXXXX.

Steve


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Visite nuestro Sitio http://www.personal.com.py




========================================================================================
AVISO LEGAL: Esta información es privada y confidencial y está dirigida
únicamente a su destinatario. Si usted no es el destinatario original de
este mensaje y por este medio pudo  acceder a dicha información por favor
elimine el mensaje. La distribución o copia de este mensaje está
estrictamente prohibida. Esta comunicación es sólo para  propósitos de
información y no debe ser considerada como propuesta, aceptación ni como
una declaración de voluntad oficial de NUCLEO S.A.  La transmisión de
e-mails no garantiza que el correo electrónico sea seguro o libre de error.
Por consiguiente, no manifestamos que esta información sea completa o
precisa.  Toda información está sujeta a alterarse sin previo aviso.
.............................................................................................................................................................................................................
 This information is private and confidential and intended for the
recipient only. If you are not the intended recipient of this message you
are hereby notified that any review,  dissemination, distribution or
copying of this message is strictly prohibited. This communication is for
information purposes only and shall not be regarded neither as a proposal,
acceptance nor as a statement of will or official statement from NUCLEO
S.A. . Email transmission cannot be guaranteed to be secure or error-free.
Therefore,  we do not represent that this information is complete or
accurate and it should not be relied upon as such. All information is
subject to change without notice.