[Asterisk-Users] avm b1with chan capi and siemens hipath

[Armin Schindler]

Did you try the /b option of Dial() with capi?
This enables early-b3, whcih gives you progress tones from the ISDN line.

Armin


On Thu, 20 Apr 2006, Ricardo wrote:
> Hello.
> I have asterisk with an old avm b1 v3.0 configured and working with capi
> channel . The isdn card is connected to an S0 isdn bus of a  siemens hipath
> 3000  version 4.0 It is possible to make outgoing calls and receive too, but I
> think that there is some kind of signaling problem when i call from an ip
> phone or soft ip phone because i do not get ring or busy tone calling to any
> PBX phone, but if i get outside line (i.e. calling a cell phone at PSTN) then
> i can hear the busy or ring tones.
> 
> So, if i call to any pbx phone i do not hear anything until someone picks up
> the phone and if it is busy i do not know and after a while i get the normal
> call clearing and the call is finished.
> 
> IP PHONE ----->  B1 (ISDN) chan capi AT * ----------> S0 BUS HIPATH --------->
> PSTN
> 
> Does anybody know any useful trick to solve this?
> I know that may be it is a signaling problem and isdn related question, but if
> someone can help me it would be great.
> 
> Pardon my bad English and thanks.
> 
> Some configured parameters:
> ****************************************************************************
> ; 
> ; capi.conf
> ; 
> 
> ; general section
> 
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> language=es     
> ; interface sections ...
> 
> [ISDN1]         ;ntmode=yes    isdnmode=msn incomingmsn=620   controller=1
> group=1          ;dialout group
> ;prefix=0       softdtmf=on      ;enable/disable software dtmf detection,
> recommended for AVM cards
> accountcode=     ;Asterisk accountcode to use in CDRs
> context=capi-in  ;context for incoming calls
> holdtype=hold ;
> ; immediate=yes  echosquelch=1  echocancel=yes echotail=64    
> bridge=yes   callgroup=1  language=es   
> ***********************************************************************
> ; 
> ; indications.conf
> ; 
> [general]
> country=es
> 
> [es]
> description = Spain
> ringcadence =1500,3000
> dial = 423
> busy =425/200,0/200
> congestion = 425/200,0/200,425/200,0/200,425/200,0/600
> callwaiting = 425/175,0/175,425/175,0/3500
> dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425
> record = 1400/500,0/15000
> info = 950/330,0/1000
> dialout = 500
> 
> *********************************************************************
> ; 
> ; part of dial extensions.conf  for dialing outisde
> ; RDSI=620 is the number for the isdn S0 bus
> ; 
> [capi-out]
> exten => _0.,1,NoOp("Salida a la calle" ${CALLERID})
> exten => _0.,2,Dial(CAPI/g1/${RDSI},20)
> ...
> 
> **********************************************************************
> Thanks.
> Ricardo
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>