[Asterisk-Users] callerid name inboune from PRI

[Matthew Fredrickson]

It is in fact required for some implementations of callerid name.  It 
comes on a facility message that arrives after the call is setup.  It 
also can come in a display IE in the call setup.  It really depends on 
which way they are sending it.

Matthew Fredrickson

On Apr 11, 2006, at 12:49 PM, C F wrote:

> No, I'm taking receiving CallerID name and *not* sending. and no on a
> PRI wait should not be required for callerID to come in.
>
> On 4/11/06, Jerry Jones <jjones at danrj.com> wrote:
>> I CAN VERIFY via aa dozen PRI from XO that yes indeed provide
>> incoming callerID on PRI. It arrives shortly after the setup message.
>> Hence the wait(1) required to display it.
>> Now if you are referring to sending caller name across PSTN - that
>> does NOT work since the terminating switch will do a CNAM lookup.
>>
>> On Apr 10, 2006, at 10:55 PM, C F wrote:
>>
>>> On 4/10/06, Andres <andres at telesip.net> wrote:
>>>> Steven wrote:
>>>>
>>>>> I switched PRI vendors recently, and one of my questions was "do
>>>>> you provide caller ID name in addition to number?"
>>>>> AT&T Local did not, But XO communications said they did.
>>>>>
>>>>>
>>>> You heard wrong.  We have multiple PRIs from XO and they DO NOT send
>>>> caller name.  We have discussed the issue with them on several
>>>> ocassions.  The sales people will say whatever they want, but the
>>>> tech
>>>> people who actually work in the switches know that caller name is 
>>>> not
>>>> supported.
>>>
>>> I believe he didn't hear wrong, a lot of providers are now providing
>>> CallerID with name over PRI. The tech people know it *is* supported
>>> (all it is is a stupid simple lookup on the SS7 side of the 
>>> equipment)
>>> but wasn't done until now because the competition didn't offer it, 
>>> but
>>> now that the competition is offering it, everyone else is as well.
>>>
>>>>
>>>>> Before I call to complain, is there an setting to turn this on in
>>>>> asterisk?
>>>>> I want to make sure that I have my side covered before I call XO.
>>>>>
>>>>> My current zaptel.conf is:
>>>>>
>>>>> context=from-pstn
>>>>> switchtype=national
>>>>> pridialplan=unknown
>>>>> prilocaldialplan=unknown
>>>>> priindication = outofband
>>>>> signalling=pri_cpe
>>>>> usecallerid=yes
>>>>> hidecallerid=no
>>>>> usecallingpres=yes
>>>>> echocancel=yes
>>>>> echocancelwhenbridged=no
>>>>> group=0
>>>>> callgroup=1
>>>>> pickupgroup=1
>>>>> accountcode=I
>>>>> musiconhold=default
>>>>> channel => 1-23
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Andres
>>>> Technical Support
>>>> http://www.telesip.net
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>
>>>> Asterisk-Users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users