[Asterisk-Users] callerid name inboune from PRI

[C F]

No, I'm taking receiving CallerID name and *not* sending. and no on a
PRI wait should not be required for callerID to come in.

On 4/11/06, Jerry Jones <jjones at danrj.com> wrote:
> I CAN VERIFY via aa dozen PRI from XO that yes indeed provide
> incoming callerID on PRI. It arrives shortly after the setup message.
> Hence the wait(1) required to display it.
> Now if you are referring to sending caller name across PSTN - that
> does NOT work since the terminating switch will do a CNAM lookup.
>
> On Apr 10, 2006, at 10:55 PM, C F wrote:
>
> > On 4/10/06, Andres <andres at telesip.net> wrote:
> >> Steven wrote:
> >>
> >>> I switched PRI vendors recently, and one of my questions was "do
> >>> you provide caller ID name in addition to number?"
> >>> AT&T Local did not, But XO communications said they did.
> >>>
> >>>
> >> You heard wrong.  We have multiple PRIs from XO and they DO NOT send
> >> caller name.  We have discussed the issue with them on several
> >> ocassions.  The sales people will say whatever they want, but the
> >> tech
> >> people who actually work in the switches know that caller name is not
> >> supported.
> >
> > I believe he didn't hear wrong, a lot of providers are now providing
> > CallerID with name over PRI. The tech people know it *is* supported
> > (all it is is a stupid simple lookup on the SS7 side of the equipment)
> > but wasn't done until now because the competition didn't offer it, but
> > now that the competition is offering it, everyone else is as well.
> >
> >>
> >>> Before I call to complain, is there an setting to turn this on in
> >>> asterisk?
> >>> I want to make sure that I have my side covered before I call XO.
> >>>
> >>> My current zaptel.conf is:
> >>>
> >>> context=from-pstn
> >>> switchtype=national
> >>> pridialplan=unknown
> >>> prilocaldialplan=unknown
> >>> priindication = outofband
> >>> signalling=pri_cpe
> >>> usecallerid=yes
> >>> hidecallerid=no
> >>> usecallingpres=yes
> >>> echocancel=yes
> >>> echocancelwhenbridged=no
> >>> group=0
> >>> callgroup=1
> >>> pickupgroup=1
> >>> accountcode=I
> >>> musiconhold=default
> >>> channel => 1-23
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> Andres
> >> Technical Support
> >> http://www.telesip.net
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> Asterisk-Users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>