[Asterisk-Users] Where is the difference sip.conf - Real-time ?

[Alban]

Hello,
Have you tried to delete rtnoupdate and rtautoclear lines? I'm using realtime, 
with caching for sip but without those 2 lines, and works perfectly.
Another point : verify that you have the field fullcontact in your realtime 
sip table.
Bye,
Alban Elziere
> I have two phones (111 and 112) on a LAN, and I have on a users site a
> phone 333.
>
> phone 111 uses sip.conf, while 112 uses real-time set-up.
> 111 can call 333 AND the audio is working
> 112 can call 333 but audio is just white noise.
> 333 can call 111 or 112 and audio is working.
> The phones are identically set-up (just user name = phone number and
> password are different)
>
> sip.conf (for 111 - all remarked lines removed)
>
> [general]
> context=default            ; Default context for incoming calls
> port=5060            ; UDP Port to bind to (SIP standard port is 5060)
> bindaddr=0.0.0.0        ; IP address to bind to (0.0.0.0 binds to all)
> srvlookup=yes            ; Enable DNS SRV lookups on outbound calls
> tos=lowdelay                   ;
> lowdelay,throughput,reliability,mincost,none
> maxexpirey=7200        ; Max length of incoming registration we allow
> defaultexpirey=3600        ; Default length of incoming/outoing
> registration videosupport=yes        ; Turn on support for SIP video
> disallow=all            ; First disallow all codecs
> allow=ulaw            ; Allow codecs in order of preference
> allow=alaw
> allow=g729
> allow=gsm
> rtcachefriends=yes
> rtnoupdate=yes
>  rtautoclear=yes
> externip = 59.14.2.1
> localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks
>
>
> [111]
> type=friend
> username=hotline
> secret=I-know-it
> canreinvite=no
> host=dynamic
> dtmfmode=rfc2833
> mailbox=111 at default
> nat=yes
> callgroup=1
> pickupgroup=1
> callerid="Ronald Hotline",<111>
> qualify=1000
>
>
> Real-time for 112:
> name=112
> callerid="Ronald Hotline",<112>
> canreinvite=yes
> context=default
> dtmfmode=rfc2833
> host=dynamic
> language=en
> mailbox=112 at default
> nat=yes
> pickupgroup=1
> port=5060
> qualify=1000
> secret=I-know-it
> type=friend
> username=112
> disallow=all
> allow=ulaw;alaw;g729;gsm
> cancallforward=yes
>
>
> Which of the settings cause the different behaviour?
> Which settings should I change (maybe not related to the problem)?
>
> bye
>
> Ronald
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users