[Asterisk-Users] Re: callerid name inboune from PRI

[Steven]

Thanks for the info.

I went to add the Wait(2), but am unsure where to do it.
My context is "from-pstn".

My [from-pstn] is:
[from-pstn]
exten => s,1,NoOp(${TIMESTAMP} PRI call in)   ;    I tried adding this to see if "s" is used, but lothing was logged.
include => from-pstn-custom                     ; create this context in extensions_custom.conf to include customizations
include => ext-did
exten => fax,1,Goto(ext-fax,in_fax,1)

My "from-pstn-custom" is non-existent and my "ext-did" is just an include for "ext-local", which is my inside extensions.

If I understand you correctly, I need the wait before I pick up the line.
If I change the span to immediate=yes, I can use the "s" extension, but It would also answer the line early.

I am drawing a blank where to put the wait.

Please advise.






-- 
-- 
Steven

http://www.glimasoutheast.org



"Alexander Lopez" <Alex.Lopez at OpSys.com> wrote in message news:E918F2FD95450648B7F8C957D92D5271422822 at exmail.corp.opsys.com...
There is nothing you really need 'to do' if your PRI is working already,
If you are able to receive and make calls your D-Channel is functioning
properly.  In the case of CallerID, some telcos provide this extra
function via the FACILITY messages instead of the SETUP messages, If
that is the case, you will get no Name but you will get a number. IT
simply means that Asterisk answered the call with the SETUP message but
was unable to read in the CALLERID Name to pass on to your devices
because it comes later on in the call via the FACILITY.

Add a Wait(2) before you answer the call for your PRI, see if that
helps.



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
> Sent: Monday, April 10, 2006 8:57 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] callerid name inboune from PRI
>
> I switched PRI vendors recently, and one of my questions was
> "do you provide caller ID name in addition to number?"
> AT&T Local did not, But XO communications said they did.
>
> Before I call to complain, is there an setting to turn this
> on in asterisk?
> I want to make sure that I have my side covered before I call XO.
>
> My current zaptel.conf is:
>
> context=from-pstn
> switchtype=national
> pridialplan=unknown
> prilocaldialplan=unknown
> priindication = outofband
> signalling=pri_cpe
> usecallerid=yes
> hidecallerid=no
> usecallingpres=yes
> echocancel=yes
> echocancelwhenbridged=no
> group=0
> callgroup=1
> pickupgroup=1
> accountcode=I
> musiconhold=default
> channel => 1-23
>
>
>
>
> --
> --
> Steven
>
> http://www.glimasoutheast.org
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users