[Asterisk-Users] legacy Alcatel 4200/4400 and Asterisk (QSIG/PRI)and callerid

[Mimmus]

Hi,
I have same setup:

  PSTN E1 PRI --- Asterisk --- Crossed E1 cable --- Alcatel 4400 PBX

with some IP phones directly connected to Asterisk and a lot of
analog/digital phones connected to 4400.

When I call from an IP phone to an Alcatel one, I'm able to see full
CallerIDName.
I set it using:
 Set(CALLERID(name)=...)
but you can use also:
 SetCIDName(...)
even if it is deprecated in 1.2.x


I don't know if I'm using Q.Sig or EuroISDN!

Bye
DV

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Miroslav HOSTINSKY
> Sent: Wednesday, April 05, 2006 7:26 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] legacy Alcatel 4200/4400 and 
> Asterisk (QSIG/PRI)and callerid
> 
> Hello,
> 
> I have connected asterisk box with legacy PBX Alcatel OmniPCX 
> 4400 (and also another * box connected to A4200).
> 
> These PBXes have function to assign name to extensions and 
> display it on phone.
> 
> Asterisk box is connected via PRI with euroISDN signalling 
> (also I have tried QSIG). 
> 
> Is it possible to set callerid with name and display it on 
> alcatel digital phones? With command SetCALLERID I am able 
> only set callerid number (and
> name) but on phone is always only callerid number...
> 
> thanks...
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>