[Asterisk-Users] Anybody know about Cisco VOIP routers?

[Bill Gibbs]

voice class codec 1
 codec preference 1 g711ulaw
 codec preference 2 g729r8

dial-peer voice 1 voip
blah
voice-class codec 1


Bill

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Greg
Oliver
Sent: Monday, April 03, 2006 4:23 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Anybody know about Cisco VOIP routers?

On Mon, 2006-04-03 at 13:59 -0500, Doug wrote:
> At 22:16 3/30/2006, Bill Gibbs wrote:
>  >Use the codec command in your dial-peer. Or a voice-class so you can
>  >have multiple supported codecs.
> 
> Thanks, Bill.
> 
> Could you please give an example of a voice-class
> entry in the dial-peer file?
> 

The voice classes we use are assigned to the physical interfaces.

voice class permanent 1
 signal timing idle suppress-voice 1
 signal timing oos timeout disabled
 signal keepalive disabled
 signal sequence oos no-action

voice-port 1/0/0
 voice-class permanent 1

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users