[Asterisk-Users] Call Back On Busy?

[Sherwood McGowan]

Thank you, I do appreciate that many ATAs have redial on busy, but I've been
given the charge of figuring out how one would do it in Asterisk.
 
Don't ask me why
 


  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon Estep
Sent: Monday, September 26, 2005 10:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Call Back On Busy?



This may not apply to your situation, but many ATAs and SIP phones have this
feature built in to the device.

 

We use Linksys/Sipura and auto redial and last call return work without any
special setup.

 


  _____  


From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sherwood
McGowan
Sent: Monday, September 26, 2005 7:45 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Call Back On Busy?

 

I know it's been touched on before, but no answers have been found to the
best of my knowledge. I'm using a SIP only setup, with a sip provider giving
PSTN and would like to see if anyone has an idea for creating redial busy
using ${DIALSTATUS} and possibly MeetMe?

 

I figure something like this, but want to get feedback

 

1. Get callers last dialed number, if international number, do not allow.

2. Playback a stuttertone to caller

3. Disconnect caller

4. Ring intended party check dial status. If busy, wait 120 seconds and try
again (do this for a total of 15 minutes)

5. If it's picked up, playback an announcement to the party and put them in
a meetme conference

6. Ring the original caller and bridge them to the meetme conference. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050926/9a8d6be0/attachment.htm