[Asterisk-Users] Send DTMF after call bridge

[Mohammed Salim]

Thanks for replying Alvaro but for me that same dialplan is not working. I
know the digits are sent as the calling card menu doesn't come up and
instead after a few seconds it says "the number you have dialed is invalid".
I have tried putting in multiple w's but like I said, the problem is that
the digits are sent before the call is bridged.  I need to send it
afterwards.

Let me know if you have any other solutions please. Thanks.

Regards,
Mohammed Salim



Message: 1
Date: Sat, 24 Sep 2005 23:08:46 +0200
From: "Alvaro G. M." <asterisk at linenoise.info>
Subject: Re: [Asterisk-Users] Send DTMF after call bridge
To: Asterisk Users <asterisk-users at lists.digium.com>
Message-ID: <200509242308.46513.asterisk at linenoise.info>
Content-Type: text/plain;  charset="iso-8859-1"

On Saturday 24 September 2005 21:21, Mohammed Salim wrote:
> Hello everyone.
> 
> Let me first begin by explaining what I'm trying to do...
> 
> I have a calling card that has an access number and requires a PIN to 
> be entered and then the number you want to dial, like normal calling 
> cards. So what I have done is assign a local DID which when called, 
> initiates a Dial to the access number of the calling card.
> 

I'm in the same case and you, and the D(digits) options of Dial command
works fine for me. I use it this way:

exten => _9.,1,Dial(SIP/083 at pstn||D(w6969w${EXTEN}))

Where 6969 is my calling card number (or whatever).

--
Alvaro Gamez Machado.
alvaro.gamez at hazent.com

Hazent Systems, S.L.
http://www.hazent.com
C/Rio Caqamares 2, Oficina ocho
28804 Alcala de Henares
Madrid