[Asterisk-Users] Cisco AS5XXX + CallerID Name

[info at beprojects.com]

You need to run a late 12.3T to get name passed via SIP.

Max Braz wrote:
> Hi guys.
> 
> We have currently Asterisk CVS-v1-0-08/15/05-15:53:48
> connected in SIP with a Cisco AS5300 (IOS 12.3). One
> PRI is connected to the Cisco gateway. 
> 
> The problem we have is that on incoming PSTN calls to
> the AS5300, relayed in SIP to Asterisk, the callerID
> name is not being transmitted. We received the
> callerID number but no name. I know we are receiving
> the name from the PRI in hexadecimal format (running
> in debug mode) but the AS53003 doesn't do anything
> with it.
> 
> We tried to setup remote-party-id in the Cisco and
> setting trustripd=yes in sip.com but that did not
> help. Also, I know we can send names to Asterisk from
> the Cisco since I'm able to force the name on all
> incoming calls from the PSTN -->router(config-sip-ua)#
> calling-info pstn-to-sip from name set foo<-- The
> callerid name foo is then displayed with the correct
> callerid number for all incoming calls.
> 
> Debug mode in Asterisk shows that we are in fact
> getting the remote-party-id header but no names in it.
> Any ideas or suggestions?
> 
> Thanks,
> 
> Max
> 
> 
> 
> 
> 	
> 
> 	
> 		
> __________________________________________________________
> Lèche-vitrine ou lèche-écran ?
> magasinage.yahoo.ca
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>