[Asterisk-Users] Echo on SPA-3000 FXO

[asterisk at txpe.net]

I tried switching out the 3000 with a X100P card, but the card would 
never recognize when the caller hung up.  So, I have to keep the 
3000.  The X100P worked fine with the POTS line.

At 08:52 AM 9/15/2005, you wrote:
>  The CID with the Cisco isn't a "Cisco issue". It's actually an 
> issue based on the way Vonage passes CID through the Cisco. It 
> doesn't follow the same standard that LECs and others use.
>
>  I tried to get this going with an SPA3000 at first as well and 
> never really could get it to go right without having to really 
> hack-up my chan_sip.c. In the end I switched out the SPA-3000 for a 
> Digium TDM card with an FXO module on it and now use the following 
> in the dial plan for when that fxo port rings:
>
>[fxoports]
>exten => s,1,Cut(cidone=CALLERID,<,1)
>exten => s,2,Cut(cidtwo=CALLERID,<,2)
>exten => s,3,GotoIf($[${LEN(${cidtwo})} > 0]?4:12)
>exten => s,4,SetCIDNum(${cidtwo:1:10})
>exten => s,5,SetVar(cidone=${cidone:2})
>exten => s,6,NoOp(${cidone})
>exten => s,7,SetVar(ciolen=${LEN(${cidone})})
>exten => s,8,SetVar(ciolen=$[${ciolen} - 2])
>exten => s,9,NoOp(${ciolen})
>exten => s,10,SetCIDName(${cidone:0:${ciolen}})
>exten => s,11,Goto(fxoports,s,14)
>exten => s,12,SetCIDNum(${CALLERID})
>exten => s,13,SetCIDName(Unavailable)
>exten => s,14,NoOp(${CALLERIDNUM})
>exten => s,15,NoOp(${CALLERIDNAME})
>
>  CVS-HEAD versions of asterisk will complain when you do this 
> because it's using the deprecated SetCIDNum and SetCIDName 
> functions. In that case you'll want to replace those with 
> SetVar(CALLERID(name)=value) and SetVar(CALLERID(number)=value) instead.
>
>
>
>On 9/15/05, <mailto:asterisk at txpe.net>asterisk at txpe.net 
><<mailto:asterisk at txpe.net>asterisk at txpe.net> wrote:
>I've been using 2 SPA3000's for several months.  Both are running
>3.1.3(GWa) software.  I do not have any issues with echo.  One box is
>used to bring in a SBC POTS line and the other is connected to my
>Cisco ATA186 from Vonage.  The 3000 connected to SBC line relays CID
>info, I have never been able to get CID info passed from the 3000
>connected to the Cisco unit.
>
>Doug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050915/f2ef67a4/attachment.htm