[Asterisk-Users] TDM400 and Phone does not 'ring'

[Dave Cotton]

On Mon, 2005-09-12 at 10:03 +0200, Alex Ongena wrote:
> Indead, it's a Siemens DECT Phone (Gigaset) that does not ring.
> I could not find the patch, but will start searching in the code.
> Thanks for the pointer !!!
> Alex
> 
> On Wed, 2005-09-07 at 17:46 +0200, Wilson Pickett wrote:
> > > 1 phone 'ringes' a bit cripled (instead of ring-ring... ring-ring..., it
> > >   does  'ring-ri... ri.... ring... ri...)
> > > and the 3rd one does not ring at all when Asterisk says 'Ringing Zap/6'.
> > > However, when I do an 'off-hook' on this phone, I get tone signal and
> > > can dial and talk perfectly.
> > > 
> > > I have phones compliant to the Belgium (Belgacom) Telco specs.
> > > Are there differences in 'Ring Voltage' ?
> > 
> > There is an issue here in France with our Siemens DECT phones that
> > required a patch to change the ring _frequency_. It was given here
> > ages ago, but now I can't find it. I believe it is still in "bugs". It
> > requires a change to one line in wcfxs.c
> > _______________________________________________

Try 

http://bugs.digium.com/bug_view_page.php?bug_id=600&history=1

I've had loads of trouble with Gigaset 4010 Comforts and GS HT286s,
other Siemens, older and newer, work OK.  Must be the Taiwanese garage
that Siemens buys them from :).


-- 
Dave Cotton <dcotton at linuxautrement.com>