[Asterisk-Users] Solution for 12 to 16 FXO to asterisk connection

Damon Estep damon at suburbanbroadband.net
Thu Sep 8 19:30:54 MST 2005


How about a used cisco iad2400 with a 16fxo module? Check ebay - no t1
card required. Probably $1000

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Erick Perez
> Sent: Thursday, September 08, 2005 8:27 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Solution for 12 to 16 FXO to asterisk
connection
> 
> Hi, today a customer asked how to use asterisk with 12 to 16 FXO
> ports. I can use a channel bank with 16 FXO ports and connect the
> channel bank with a T1 cable to a T1 card in the Asterisk Server.
> Asterisk will then send the calls to the Voip provider over the
> internet.
> 
> However a 16 fxo port channel bank is about USD 1500 + a t1 card USD
> 500 + a USD 1000 computer = 3 thousand us dollars + my installation
> fees (life isn't free).
> 
> Sounds expensive for such a small install.
> 
> Suggestions?
> 
> 
> --
> 
> -------------------------------------------
> Erick Perez
> Linux User 376588
> http://counter.li.org/  (Get counted!!!)
> Panama, Republic of Panama
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list