[Asterisk-Users] How to connect many analog lines to Asterisk?

[Jonathan k. Creasy]

You asked how to connect lines, so he answered that question. The answer
is basically the same just change the FXO in the channel bank to FXS. 
-Jonathan

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Josip
Gracin
Sent: Wednesday, September 07, 2005 12:11 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] How to connect many analog lines to
Asterisk?


Darren Wright wrote:
> Wow, first of all, if you have a hundred analog lines, you are doing 
> yourself a disservice.....a 4 T1's would be much much cheaper, and 
> much easier to manage.

Let me clear this up a little bit.  There are hundreds of telephone 
devices inside the building, all connected to a PBX, and there is an 
E1/T1 connection to the PSTN (being statistically multiplexed, 
obviously).  What I'd like to do is to replace the PBX with Asterisk.

I don't see how I can make the situation better by using 4 T1's?

> Anyway, for 100 analog lines, I'd get 3 adit 600 channel banks and 
> fill them with FXO cards, and then buy 1 TE406 Quad T1 card for your 
> asterisk box.

Thanks, I think that's what I need.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users