[Asterisk-Users] newbie install problem. And I already searchedeverywhere!

[Dave Cotton]

On Sat, 2005-09-03 at 20:47 +0200, Jeroen Baten wrote:

> I just changed in zapata.conf the signalling to:
> signalling = bri_net_ptmp
> 
> and this changes the output considerably:
> 
> *CLI>
>     -- Executing Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}") in new 
> stack
>     -- Called <mycellphonenumber}
>     -- Channel 0/2, span 1 got hangup
>     -- Hungup 'Zap/2-1'
>   == No one is available to answer at this time
> 
> *CLI>   
> 

That's exactly the same as I got on Friday.

I'd just changed from a Fritz! with chan_capi to a 4 way BRI, reverting
to the Fritz! restored everything.


-- 
Dave Cotton <dcotton at linuxautrement.com>