[Asterisk-Users] No D-channels available! CVS-HEAD-10/31/05-16:01

[OTR Comm]

Hello all,

I am having D-channels problems.

I have setup Asterisk (CVS-HEAD-10/31/05-16:01) on RH Fedora Core
4(2.6.13-1.1532_FC4).  I also have 2 TE110XP cards set to T1 (only one
with a T1 connect currently).  I had my telco provider rebuild the T1 on
a new card, and they say that they can see my D-channels.

Anybody have any ideas about this?

Thanks,
Murrah Boswell

dmesg gives:
...
eth0: Media Link On 100mbps full-duplex 
NET: Registered protocol family 10
Disabled Privacy Extensions on device c04756a0(lo)
IPv6 over IPv4 tunneling driver
Zapata Telephony Interface Registered on major 196
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low)
-> IRQ 5
Controller version: 24
FALC version: 00000000
TE110P: Setting up global serial parameters for T1 FALC V1.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
Controller version: 24
FALC version: 00000000
TE110P: Setting up global serial parameters for T1 FALC V1.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1
Registered tone zone 0 (United States / North America)
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
wcte1xxp: Setting yellow alarm
Zaptel: Master changed to WCT1/1
wcte1xxp: Setting yellow alarm
eth0: no IPv6 routers present
wcte1xxp: Clearing yellow alarm
wcte1xxp: Clearing yellow alarm
Zaptel: Master changed to WCT1/0

my zaptel.conf:
span=1,1,1,esf,b8zs
span=2,0,1,esf,b8zs
bchan=1-23
dchan=24
e&m=25-48
defaultzone=us
loadzone=us

NOTE:span2 doesn't have a T1 connected yet though.

lsmod:
Module                  Size  Used by
wcte11xp               53536  43 
zaptel                230660  91 wcte11xp
crc_ccitt               2241  1 zaptel
ipv6                  292865  14 
sunrpc                197509  1 
dm_mod                 61917  0 
video                  16197  0 
button                  6737  0 
battery                 9541  0 
ac                      4933  0 
sis900                 24385  0 
mii                     5569  1 sis900
floppy                 71861  0 
ext3                  138569  2 
jbd                   111065  1 ext3

/proc/zaptel/1:
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" B8ZS/ESF 

           1 WCT1/0/1 Clear (In use) 
           2 WCT1/0/2 Clear (In use) 
           3 WCT1/0/3 Clear (In use) 
           4 WCT1/0/4 Clear (In use) 
           5 WCT1/0/5 Clear (In use) 
           6 WCT1/0/6 Clear (In use) 
           7 WCT1/0/7 Clear (In use) 
           8 WCT1/0/8 Clear (In use) 
           9 WCT1/0/9 Clear (In use) 
          10 WCT1/0/10 Clear (In use) 
          11 WCT1/0/11 Clear (In use) 
          12 WCT1/0/12 Clear (In use) 
          13 WCT1/0/13 Clear (In use) 
          14 WCT1/0/14 Clear (In use) 
          15 WCT1/0/15 Clear (In use) 
          16 WCT1/0/16 Clear (In use) 
          17 WCT1/0/17 Clear (In use) 
          18 WCT1/0/18 Clear (In use) 
          19 WCT1/0/19 Clear (In use) 
          20 WCT1/0/20 Clear (In use) 
          21 WCT1/0/21 Clear (In use) 
          22 WCT1/0/22 Clear (In use) 
          23 WCT1/0/23 Clear (In use) 
          24 WCT1/0/24 HDLCFCS (In use)

/proc/interrupts:
           CPU0       
  0:     557034          XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:    2206093          XT-PIC  wcte11xp
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:    2206091          XT-PIC  wcte11xp
 11:      72141          XT-PIC  eth0
 12:         93          XT-PIC  i8042
 14:       3572          XT-PIC  ide0
 15:      19881          XT-PIC  ide1
NMI:          0 
ERR:          0