[Asterisk-Users] x100p (FXO) not being seen by asterisk (is my bestguess) .

[Mr. James W. Laferriere]

	Hello Paul & all ,

On Wed, 26 Oct 2005, Mr. James W. Laferriere wrote:
> 	Hello Paul & all ,  I've tried everything I know to attempt to get the 
> 	wcfxo.ko not to use irq 9 .  THe 6 line cord does not appear to effect
> 	the signaling to the x100p card ,  I have turned up the debugging & have 
> 	that being syslog'd .  Have debugging on zaptel as well .  Nothing seems 
> 	out of the ordinary .  But monitoring from 'asterisk -d -vvvvv -nr' 
> 	console does not show anything '.' .  Have I forgotten some 
> 	configurations or magical incantation ?  Tia ,  JimL
> 
> On Wed, 26 Oct 2005, Paul wrote:
> > First I don't like the 6 line cord.  Use an rj11 2 wire cord, but watch the
> > crossover vrs straight on the old red and green.
> > 
> > Next the interrupt must be fixed.  Do this in the CMOS before you boot.  Go
> > to the PCI bus assignments and set the IRQ or go and disable the serial
> > ports thereby allowing irq 3 and 4 to be assigned.
> > 
> > :)
> > Paul
	Sorry about the top posting ...  Also forgot the syslog output . 
		Tia ,  JimL

Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent: <NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: subsystem zaptel: registering
Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent: <NULL>, set: class
Oct 26 20:11:19 asterisk-test kernel: kobject zaptimer: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapchannel: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zappseudo: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapctl: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: Zapata Telephony Interface Registered on major 196
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent: <NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent: <NULL>, set: drivers
Oct 26 20:11:19 asterisk-test kernel: PCI: Found IRQ 9 for device 0000:01:02.0
Oct 26 20:11:19 asterisk-test kernel: PCI: Sharing IRQ 9 with 0000:00:1f.3
Oct 26 20:11:19 asterisk-test kernel: kobject zap1: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: New regoffset: 7
Oct 26 20:11:20 asterisk-test kernel: wcfxo: DAA mode is 'FCC'
Oct 26 20:11:20 asterisk-test kernel: Found a Wildcard FXO: Wildcard X101P
Oct 26 20:11:20 asterisk-test kernel: Recalculating slaves on WCFXO/0/0
Oct 26 20:11:20 asterisk-test kernel: Done Recalculating slaves on WCFXO/0/0 (last is WCFXO/0/0)
Oct 26 20:11:20 asterisk-test kernel: Configured channel WCFXO/0/0, flags 0201, sig 2004
Oct 26 20:11:20 asterisk-test kernel: Registered tone zone 0 (United States / North America)
Oct 26 20:11:20 asterisk-test kernel: BATTERY!
Oct 26 20:11:39 asterisk-test kernel: Out of storage space
Oct 26 20:11:48 asterisk-test kernel: RING!
Oct 26 20:11:50 asterisk-test kernel: NO RING!
Oct 26 20:11:54 asterisk-test kernel: RING!
Oct 26 20:11:56 asterisk-test kernel: NO RING!
Oct 26 20:13:50 asterisk-test kernel: RING!
Oct 26 20:13:52 asterisk-test kernel: NO RING!
Oct 26 20:13:56 asterisk-test kernel: RING!
Oct 26 20:13:57 asterisk-test kernel: NO RING!


-- 
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network        Engineer | 3542 Broken Yoke Dr. |  Give me Linux  |
| babydr at baby-dragons.com | Billings , MT. 59105 |   only  on  AXP |
+------------------------------------------------------------------+