[Asterisk-Users] 2-line phoneline

[John Novack]

Paul Herman wrote:

> Hi there,
>
> This'll be an easy answer for a lot of you, just wanna make sure:
>
> We ordered a 2 phone line package from SBC in Chicago (two numbers, 
> one main number), pretty basic & straigt forward.  The line to the 
> building is a four wire line with an RJ-11 connector.  We want to 
> connect both of these lines to a TDM400P with FXO modules.
>
> Q:  First of all, is there one line per pair of wires, and m I right 
> in thinking that I have to break out / splice the two middle wires 
> from the two outside ones, and connect each pair to a separate port on 
> the TDM400P card?  (i.e pins 2,5 to pin 3,4 on one port and pins 3,4 
> to pins 3,4 on the other port?)
>
> i.e. the TDM400P can't span two channels on one port, correct?
>
> Thanks,
> -Paul.
> ___

Correct on all counts.
Good luck with Ameritech ( SBC )
You'll need it!
 
John Novack

>