[Asterisk-Users] Asterisk Newbee: Fedora Core 4

[OTR Comm]

Hello,

I am new to asterisk, but trying to set it up under Fedora Core 4
(2.6.13-1.1532_FC4) with two TE110p cards jumpers set to T1, and am having a
terrible time.  System installed as a server (Redhat setup option) and
updated with 'yum update'.  The TE110p cards do not share interrupts with
other devices.

I got asterick, zaptel, and libpri through CVS.  I got asterisk-addons and
asterisk-sounds through tarballs (both 1.0.9).

All of these make and install fine (zaptel built with 'make linux26').

I have Mysql installed to support cdr_mysql.

I 'modprobe -i zaptel' and 'modprobe -i wcte11xp' and follow with 'ztcfg
/etc/zaptel.conf' and have no problems.

lsmod returns:

Module                         Size  Used by
snd_seq_dummy           3781  0
snd_seq_oss                 42945  0
snd_seq_midi_event     10177  1 snd_seq_oss
snd_seq                        78033  5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device           9165  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss               53105  0
snd_pcm                      112201  1 snd_pcm_oss
snd_timer                    42437  2 snd_seq,snd_pcm
snd_page_alloc           10825  1 snd_pcm
snd_mixer_oss            18241  1 snd_pcm_oss
snd                              62021  7
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_o
ss
soundcore                   12449  1 snd
wcte11xp                    53920  0
zaptel                          230148  5 wcte11xp
crc_ccitt                     2241  1 zaptel
ipv6                            292865  16
sunrpc                        197509  1
dm_mod                     61917  0
video                         16197  0
button                        6737  0
battery                       9541  0
ac                              4933  0
sis900                       24385  0
mii                            5569  1 sis900
floppy                       71861  0
ext3                           138569  2
jbd                            111065  1 ext3

zaptel.conf file

span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
bchan=1-23
dchan=24
e&m=25-48
defaultzone=us
loadzone=us

cat /proc/interrupts
           CPU0
  0:    2476816    XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:    9884737    XT-PIC  wcte11xp
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:    9884739   XT-PIC  wcte11xp
 11:      13777     XT-PIC  eth0
 12:         93        XT-PIC  i8042
 14:      35514     XT-PIC  ide0
 15:      88713     XT-PIC  ide1
NMI:          0
ERR:          0


cat /proc/zaptel/*
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" B8ZS/ESF

           1 WCT1/0/1 Clear
           2 WCT1/0/2 Clear
            ...
          24 WCT1/0/24 HDLCFCS
Span 2: WCT1/1 "Digium Wildcard TE110P T1/E1 Card 1" B8ZS/ESF

          25 WCT1/1/1 E&M
          26 WCT1/1/2 E&M

            ...
          48 WCT1/1/24 E&M


zttool shows both cards 'OK'

Then when I run 'asterisk -c' I get to the CLI prompt,but if I execute 'pri
show span 1', I get:

No PRI running on span 1

same for span 2

If I do 'show channels', I get:

0 active channels
0 active calls

zap show status returns:

Description                                                    Alarms
IRQ        bpviol     CRC4
Digium Wildcard TE110P T1/E1 Card 0      OK                  0          0
0
Digium Wildcard TE110P T1/E1 Card 1      OK                  0          0
0


zap show channels returns:

   Chan Extension  Context         Language   MusicOnHold
 pseudo            default

and if I dial a number on one of my trunks, I get a bust signal.

Bottomline is, I can't get Asterisk to work under Fedora Core 4 with kernel
2.6.13-1.1532_FC4, anybody have any ideas what Imight have done wrong, or
steps I forgot to take?

I can post any other config files you need to help me figure this out.

Thanks,
Murrah