[Asterisk-Users] TDM02B card difficulties

[Tzafrir Cohen]

On Mon, Oct 10, 2005 at 10:27:19AM -0400, Min Qiu wrote:
> Thank you for your respond, please see more detail inline...
> 
> Min
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com 
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > Tzafrir Cohen
> > Sent: Friday, October 07, 2005 4:57 PM
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] TDM02B card difficulties
> > 
> > 
> > On Fri, Oct 07, 2005 at 03:41:43PM -0400, Min Qiu wrote:
> > > 
> > > Hi all,
> > > 
> > > I just installed an TDM02B.  My system is a dell pc with
> > > linux 2.6.12-1.1456_FC4
> > > asterisk-1.2.0-beta1
> > > zaptel-1.2.0-beta1
> > > libpri-1.2.0-beta1
> > > 
> > > in /etc/zaptel.conf I have (all others are default):
> > > fxsks=3-4                       <--- I saw light in the ports
> > > channels=1-2                    <--- change it to 3-4 has 
> > same result
> > 
> > cat /proc/zaptel/1 to see the channel numbers.
> 
> [root at nmsd0 mqiu]# cat /proc/zaptel/1
> Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> 
>            1 WCTDM/0/0
>            2 WCTDM/0/1
>            3 WCTDM/0/2
>            4 WCTDM/0/3

None of them has been configured by ztcfg, right?

What's the output of ztcfg -vv

> 
> > 
> > Anyway, the last line is incorrect. It should be used in 
> > zapata.conf and
> > not in zaptel.conf .
> 
> The zaptel.conf has "channels=..." as an example.  Took the line
> out I have:

It shouldn't . 

Could you please post /etc/zaptel.conf and /etc/asterisk/zapata.conf ?

-- 
Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir at cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend