[Asterisk-Users] No incoming calls from chan_capi 0.6

[Armin Schindler]

On Sat, 8 Oct 2005, Cedric Fontaine wrote:
> Armin Schindler wrote:
> 
> > 
> > Please increase verbosity (set verbose 5) and switch on debugging
> > (capi debug). Then you should see what's happening.
> 
> *CLI> set verbose 6
> Verbosity was 3 and is now 6
> *CLI> capi debug
> CAPI Debugging Enabled
> CONNECT_IND ID=001 #0x06ed LEN=0042
>   Controller/PLCI/NCCI            = 0x101
>   CIPValue                        = 0x4
>   CalledPartyNumber               = <81>9100
>   CallingPartyNumber              =  <83>467201717
>   CalledPartySubaddress           = default
>   CallingPartySubaddress          = default
>   BC                              = <90 90 a3>
>   LLC                             = default
>   HLC                             = default
>   AdditionalInfo                  = default
> 
>     -- CONNECT_IND
> (PLCI=0x101,DID=9100,CID=467201717,CIP=0x4,CONTROLLER=0x1)
>        > numeris1: msn='*' DNID='9100' MSN
>   == numeris1: Incoming call '0467201717' -> '9100'
> INFO_IND ID=001 #0x06ee LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x1e
>   InfoElement                     = <84 83>
> 
> INFO_RESP ID=001 #0x06ee LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element PI 84 83
>        > numeris1: Origination is non ISDN
> INFO_IND ID=001 #0x06ef LEN=0020
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x70
>   InfoElement                     = <81>9100
> 
> INFO_RESP ID=001 #0x06ef LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element CALLED PARTY NUMBER
>        > numeris1: INFO_IND DID digits not used in this state.
> INFO_IND ID=001 #0x06f0 LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x18
>   InfoElement                     = <89>
> 
> INFO_RESP ID=001 #0x06f0 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element CHANNEL IDENTIFICATION 89
> INFO_IND ID=001 #0x06f1 LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0xa1
>   InfoElement                     = <a1>
> 
> INFO_RESP ID=001 #0x06f1 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element Sending Complete
> CONNECT_RESP ID=001 #0x06f1 LEN=0032
>   Controller/PLCI/NCCI            = 0x101
>   Reject                          = 0x1
>   BProtocol
>    B1protocol                     = 0x0
>    B2protocol                     = 0x0
>    B3protocol                     = 0x0
>    B1configuration                = default
>    B2configuration                = default
>    B3configuration                = default
>   ConnectedNumber                 = default
>   ConnectedSubaddress             = default
>   LLC                             = default
>   AdditionalInfo
>    BChannelinformation            = default
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
> 
> DISCONNECT_IND ID=001 #0x06f2 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Reason                          = 0x0
> 
> DISCONNECT_RESP ID=001 #0x06f2 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>   == numeris1: CAPI Hangingup
>   == numeris1: Interface cleanup PLCI=0x101
> CONNECT_IND ID=001 #0x06f3 LEN=0042
>   Controller/PLCI/NCCI            = 0x101
>   CIPValue                        = 0x4
>   CalledPartyNumber               = <81>9100
>   CallingPartyNumber              =  <83>467201717
>   CalledPartySubaddress           = default
>   CallingPartySubaddress          = default
>   BC                              = <90 90 a3>
>   LLC                             = default
>   HLC                             = default
>   AdditionalInfo                  = default
> 
>     -- CONNECT_IND
> (PLCI=0x101,DID=9100,CID=467201717,CIP=0x4,CONTROLLER=0x1)
>        > numeris1: msn='*' DNID='9100' MSN
>   == numeris1: Incoming call '0467201717' -> '9100'
> INFO_IND ID=001 #0x06f4 LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x1e
>   InfoElement                     = <84 83>
> 
> INFO_RESP ID=001 #0x06f4 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element PI 84 83
>        > numeris1: Origination is non ISDN
> INFO_IND ID=001 #0x06f5 LEN=0020
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x70
>   InfoElement                     = <81>9100
> 
> INFO_RESP ID=001 #0x06f5 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element CALLED PARTY NUMBER
>        > numeris1: INFO_IND DID digits not used in this state.
> INFO_IND ID=001 #0x06f6 LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x18
>   InfoElement                     = <89>
> 
> INFO_RESP ID=001 #0x06f6 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element CHANNEL IDENTIFICATION 89
> INFO_IND ID=001 #0x06f7 LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0xa1
>   InfoElement                     = <a1>
> 
> INFO_RESP ID=001 #0x06f7 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- numeris1: info element Sending Complete
> CONNECT_RESP ID=001 #0x06f7 LEN=0032
>   Controller/PLCI/NCCI            = 0x101
>   Reject                          = 0x1
>   BProtocol
>    B1protocol                     = 0x0
>    B2protocol                     = 0x0
>    B3protocol                     = 0x0
>    B1configuration                = default
>    B2configuration                = default
>    B3configuration                = default
>   ConnectedNumber                 = default
>   ConnectedSubaddress             = default
>   LLC                             = default
>   AdditionalInfo
>    BChannelinformation            = default
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
> 
> DISCONNECT_IND ID=001 #0x06f8 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Reason                          = 0x0
> 
> DISCONNECT_RESP ID=001 #0x06f8 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>   == numeris1: CAPI Hangingup
>   == numeris1: Interface cleanup PLCI=0x101
> 
> I don't see anything related to from-pstn context.

I don't see any warnings or error messages in that log. Have you
switched off these messages on that log?

It looks like the MSN is not matching in the specified context, but
the according error message is missing.

Armin